KOOLAIR PUMPS
KOOLAIR PUMPS TPM1000 (115/230) TEFC Marine Coolant Pump
SKU: 9431100
KOOLAIR PUMPS TPM1000 (115/230) TEFC Marine Coolant Pump
The TPM1000 is a magnetically driven seawater circulation and similarly coolant pump. Motor in contrast is Totally Enclosed Fan cooled (TEFC). Furthermore, the pump contains no shaft seal. Extended run dry time is possible due to the hardened carbon bushing. This above all ensures no damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed. Only trim to modify flows or compensate higher viscosity liquids. Pump is not self priming. Requires flooded suction. Also, flow curves are based on pumping water. Limited warranty available. Thermal overload protected.
The Koolair TPM1000 is a 115/230 Volt TEFC (Totally Enclosed Fan Cooled Motor Enclosure) model. Is a sealless centrifugal magnetic drive seawater circulation coolant pump. Model generates a maximum flow of 17 gallons per minute as a result with a maximum head of 27 feet at 11.7 PSI. The TPM1000 is also ISO 8846 Marine Ignition Protected.
Similarly replaces March AC-5C-MD Pump.
1000 GPH (Gallons Per Hour).
Applications:
Most commonly used on your boat or yacht for marine air conditioning while circulating seawater.
Specifications:
- Run Dry Protected
- UL Listed
- March AC-5C-MD Replacement
- Dual 115 / 230 Volt Model
- TEFC Motor
- ISO 8846 Marine Ignition Protected
- Weight: 12 lbs
- Dimensions: 13.5" x 7" x 9"
- Maximum Flow: 1000 GPH @17.2 GPM (54.8 LPM)
- Maximum Head: 27 Feet of Head @ 11.7 PSI
- Maximum Internal Pressure: 50 PSI
- Maximum Liquid Temperature: 180° F (82° C)
- Inlet: 1 FPT
- Outlet: 1/2 MPT
- Hertz: 50/60 Hz
- Voltage: 115/230 Volt
- Phase: Single Phase (1 PH)
- Watts: 216/207
- Amps: 1.6
- Horsepower: 1/8 HP
- RPM: 3450
Features:
- To withstand thermal overloads, hence without failure, the pump is run dry protected. The pump end most is certainly protected from thermal meltdown in a run dry event.
- Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet.
- The inlet connection is a 1 FPT and the outlet is ½" MPT.
- Includes fully integrated, heavy duty base.
- The motor is a 1 Phase, Dual 115/230 Volt, 1/8 HP motor on either 50 or 60 HZ.
- Maximum internal pressure is 50 PSI.
- The maximum liquid temperature is 180 F or 82 C.
- The pump is not self-priming and requires flooded suction.
- ISO 8846 Marine Ignition Protected.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to http://www.P65Warnings.ca.gov.